 |
 |
| |
|
 Raw
materials are changed from the bale state by the bale
hopper and super blender. The hopper feeder receives these
opened raw materials, reopens them using the chute feeder
and beater roller, and delivers them to the carding machine.
The hopper feeder is used to open raw materials at a constant
thickness and balance, and then to deliver the materials
to the carding machine. |
| |
| SPEC＼
TYPE |
DW-H-C-60" |
DW-H-C-70" |
DW-H-C-80" |
DW-H-C-90" |
DW-H-C-100" |
| M/C
Dimensions |
Height(mm) |
3995 |
3995 |
3995 |
3995 |
3995 |
| Length(mm) |
3090 |
3090 |
3090 |
3090 |
3090 |
Width
(mm) |
2050 |
2305 |
2560 |
2814 |
3068 |
| Electric
Power |
Beater
R/O |
Geard
2HP( 5:1) |
Geard
2HP( 5:1) |
Geard
2HP( 5:1) |
Geard
2HP( 5:1) |
Geard
2HP( 5:1) |
| Spike
Lattice |
Geard
2HP(10:1) |
Geard
2HP(10:1) |
Geard
2HP(10:1) |
Geard
2HP(10:1) |
Geard
2HP(10:1) |
| Mixing
R/O |
4P
3HP |
4P
3HP |
4P
3HP |
4P
3HP |
4P
3HP |
| Vibrte |
Geard
1 HP |
Geard
1 HP |
Geard
1 HP |
Geard
1 HP |
Geard
1 HP |
| Feeder |
Geard
1HP(90:1) |
Geard
1HP(90:1) |
Geard
1HP(90:1) |
Geard
1HP(90:1) |
Geard
1HP(90:1) |
| No |
Name
of Roller |
Quantity |
Width
of Roller |
Width
of Roller |
Width
of Roller |
Width
of Roller |
Width
of Roller |
| 1 |
Beater
R/O |
2 |
Ø385×1397 |
Ø385×1651 |
Ø385×1905 |
Ø385×2159 |
Ø385×2413 |
| 2 |
Spike
Lattice |
1 |
1397×4080 |
1651×4080 |
1905×4080 |
2159×4080 |
2413×4080 |
| 3 |
Mixing
R/O |
1 |
Ø266×397 |
Ø266×1651 |
Ø266×1905 |
Ø266×2159 |
Ø266×
2413 |
|
| ※ The numbers specified above
are rough measurements and subject to change according
to users? requirements, raw materials, and working conditions. |
| |
 |
 |
 |
|
| Raw materials are changed from a bale
state by the bale hopper and super blender. The
master chute receives these open raw materials,
reopens them using the chute feeder and beater roller,
and finally delivers them to the carding machine.
Basically, the master chute has the same function
as the hopper feeder. However, since it occupies
less space than the hopper feeder, it is more efficient
with regard to space management. |
|
| |
| SPEC＼
TYPE |
DW - H - R 60" |
DW - H - R 80" |
DW - H - R 100" |
| M/C
Dimensions |
Height |
4662 mm |
4662 mm |
4662 mm |
| Lenght |
2550
mm |
2550
mm |
2550
mm |
| Width |
816
mm |
1070
mm |
1324
mm |
| No |
Name
of Roller |
Quantity |
Motor |
Motor |
Motor |
| 1 |
Beater R/O |
1 |
4P 5 HP |
4P 5 HP |
4P 5 HP |
| 2 |
Feeder R/O |
2 |
Geard 1HP(90:1) |
Geard 1HP(90:1) |
Geard 1HP(90:1) |
| 3 |
Vibrater |
1 |
Geard 1HP( 5:1) |
Geard 1HP( 5:1) |
Geard 1HP( 5:1) |
| 4 |
스윙 록 |
1 |
Geard 1HP(60:1) |
Geard 1HP(60:1) |
Geard 1HP(60:1) |
|
| |
 |
 |
|
|
| The hopper feeder's vibration system is
able to control the frequency and speed of
strokes according to the amount of raw material
and other related conditions. |
|
| 스윙록장치 부착으로 원료의 좌ㆍ우 쏠림 없이 골고루 공급될수 있도록 셜계되었습니다. |
|
|
| |
